进口压力容器产品安全性能监督检验实施细则.docx

进口压力容器产品安全性能监督检验实施细则一、 总则Chapter 1 General Provisions1、为保证进口压力容器产品制造质量监督检验质量，制订本细则。1 This outline is formulated in order to ensure effective supervisoryinspection of the pressure vessel products imported2、与进口压力容器产品制造质量监督检验有关各方及人员，均应遵守本细则。2 This outline is applicable to whom relevant to the supervisoryinspection for safety performance of the pressure vessel products imported二、依据Chapter 2 Supervisory Inspection Basis1、中华人民共和国国务院令第 373 号特种设备安全监察条例 ；1 Special Equipment Safety Supervision Regulation（Promulgated byDecree No. 373 of the State Council of the Peoples Republic of China）2、中华人民共和国国家质量监督检验检疫总局令第 22 号锅炉压力容器制造监督管理办法 ；2 Supervision Administration Regulation for Manufacture Licensing ofBoiler and Pressure Vessel. （ Promulgated by Decree No. 22 of GeneralAdministration of Quality Supervision, Inspection and Quarantine of thePeoples Republic of China）3、 压力容器安全技术监察规程 ；3 Supervision Regulation on the Safety Technology for Pressure Vessel.（Promulgated by Safety Supervision Department of General Administrationof Quality Supervision, Inspection and Quarantine of the Peoples Republic ofChina）4、 锅炉压力容器产品安全性能监督检验规则 。4 Supervisory Inspection Rule for Safety Performance of Boiler andPressure Vessel Products. （Promulgated by Safety Supervision Department ofGeneral Administration of Quality Supervision, Inspection and Quarantine ofthe Peoples Republic of China）三、监督检验内容Chapter 3 Contents of Supervisory Inspection1、对压力容器制造过程中涉及安全性能的项目进行监督检验；1. Supervisory inspecting the items related to the safety performance ofthe product during pressure vessel manufacturing.2、对受检企业压力容器制造质量体系运转情况进行监督检查。2. Supervisory examining the implementation of the quality system of thesupervised manufacturer.四、监检项目和方法Chapter 4 Items and Methods of Supervisory Inspection1、图样资料1. Drawing and data（1）检查压力容器设计单位的设计资格印章，确认资格有效。(1) Examine the certificate of pressure vessel designer, confirm theeffectiveness of its qualification.（2）审查压力容器制造和检验标准的有效性。(2) Review the effectiveness of standards on manufacture and inspec